Product Details

Ball Lock Disconnect - CMB Gas with barb

$12.95

Gas disconnect for 19L Post mix keg.

German-made Ball-Lock Gas Connector

Gas Connector with 1/4in Barb Ball-lock gas connector for 3g to10g post- and pre-mix product tanks with ball-lock tank plugs.

Dimensions Height: 2.1in (54mm)

Barb Diameter: 0.25in (6mm) Barb

Angle: 30°

Materials Body: Plastic Barb Post: Stainless Steel Tubing Required: 5/16in or 1/4in I.D. tubing (clamp recommended). See the helpful hint below for more tubing information.

Helpful Hint To Home Brewers: Many beer draft systems contain gas tubing that is 5/16in to 3/8in I.D. which is larger than the 1/4in barbed end of the connector). Teflon tape or a small piece of 1/4in tubing can be placed on the barbed end to increase the diameter.

Keg Compatibility: Ball-Lock connectors fit nearly any post- or pre-mix product tank commonly used for soda with ball-lock connection posts. There are many manufacturers, sources and sizes of product tanks. Such product tanks are referred to as Cornelius or ‘Corney’ kegs after the popular industry brand.

Write Your Own Review
You're reviewing:Ball Lock Disconnect - CMB Gas with barb
Contact Us